Mitsubishi MELSEC-A series User Manual

I. .
1. INTRODUCTION /MELSEC=A
1. INTRODUCTION
The AD71 is a position controller module for use with the MELSEC-A
series of programmable controllers. The operation of the position
controller may be adapted to suit the individual requirements of the
system by using the extensive MELSEC-A series software features.
This manual covers both hardware and software and contains all the
information required to install and operate the unit to its optimum.
The manual is arranged as follows:
Chapter 2 System Configuration
Explains the AD71 operating principles together with a
glossary of terms and describes the MELSEC-A series
system configurations suitable for use with the AD71.
Chapter 3 Specifications
Gives the AD71 specifications, functions, a description of
the data required for operation, 1/0 specifications with
external equipment, etc.
Chapter 4 Handling
AD7 1 nomenclature, etc.
Chapter 5 Loading and Installation
Gives AD71 installation and wiring instructions, etc.
Chapter 6 Programming
Explains the PC programming required to control the
AD71.
Chapter 7 Check Lists
Gives pre-start-up test procedures.
Chapter 8 Troubleshooting
Hardware and software fault finding
Chapter 9 Maintenance
Appendices
Gives AD71 dimensions, connection examples with
various servo motors, etc.
1-1
IS INA) M101-A

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English