Motorola AP-7131 User Manual

System Configuration
4-37
2. Configure the MU Traps field to generate traps for MU associations, MU association
denials and MU authentication denials. When a trap is enabled, a trap is sent every 10
seconds until the condition no longer exists.
3. Configure the SNMP Traps field to generate traps when SNMP capable MUs are denied
authentication privileges or are subject of an ACL violation. When a trap is enabled, a trap
is sent every 5 seconds until the condition no longer exists.
4. Configure the Network Traps field to generate traps when the access point’s link status
changes or when the AP’s firewall detects a DOS attack.
MU associated Generates a trap when an MU becomes associated with one of the
access point’s WLANs.
MU unassociated Generates a trap when an MU becomes unassociated with (or gets
dropped from) one of the access point’s WLANs.
MU denied
association
Generates a trap when an MU is denied association to a access
point WLAN. Can be caused when the maximum number of MUs
for a WLAN is exceeded or when an MU violates the access point’s
Access Control List (ACL).
MU denied
authentication
Generates a trap when an MU is denied authentication on one of
the AP’s WLANs. Can be caused by the MU being set for the wrong
authentication type for the WLAN or by an incorrect key or
password.
SNMP authentication
failures
Generates a trap when an SNMP-capable client is denied access
to the access point’s SNMP management functions or data. This
can result from an incorrect login, or missing/incorrect user
credentials.
SNMP ACL violation Generates a trap when an SNMP client cannot access SNMP
management functions or data due to an Access Control List (ACL)
violation. This can result from a missing/incorrect IP address
entered within the SNMP Access Control screen.

Motorola AP-7131 Specifications

General

Brand	Motorola
Model	AP-7131
Category	Wireless Access Point
Language	English