Configuring Access Point Security
6-59
6.13.1 Moving Rogue APs to the Allowed AP List
The Active APs screen enables the user to view the list of detected rogue APs and, if necessary,
select and move an AP into a list of allowed devices. This is helpful when the settings defined within
the Rogue AP Detection screen inadvertently detect and define a device as a rogue AP.
To move detected rogue APs into a list of allowed APs:
1. Select Network Configuration -> Wireless -> Rogue AP Detection -> Active APs from
the access point menu tree.
The Active APs screen displays with detected rogue devices displayed within the Rogue
APs table.
2. Enter a value (in minutes) in the Allowed APs
Age Out Time field to indicate the number of
elapsed minutes before an AP will be removed from the approved list and reevaluated. A
zero (0) for this value (default value) indicates an AP can remain on the approved AP list
permanently.
To Next Page
Loading...
Need help?
General
