Adaptive AP
10-19
10.4.4 Sample Switch Configuration File for IPSec and Independent
WLAN
The following constitutes a sample RFS7000 switch configuration file supporting an AAP IPSec with
Independent WLAN configuration. Please note new AAP specific CLI commands in red and relevant
comments in blue.
The sample output is as follows:
!
! configuration of RFS7000 RFS7000-1 version 1.1.0.0-016D
!
version 1.0
!
!
aaa authentication login default none
service prompt crash-info
!
hostname RFS7000-1
!
username admin password 1 8e67bb26b358e2ed20fe552ed6fb832f397a507d
username admin privilege superuser
username operator password 1 fe96dd39756ac41b74283a9292652d366d73931f
!
!
To configure the ACL to be used in the CRYPTO MAP
!
ip access-list extended AAP-ACL permit ip host 10.10.10.250 any rule-precedence 20
!
spanning-tree mst cisco-interoperability enable
spanning-tree mst config
name My Name
!
country-code us
logging buffered 4
logging console 7
logging host 157.235.92.97
logging syslog 7
snmp-server sysname RFS7000-1
To Next Page
Loading...
Need help?
General
