Monitoring Statistics
7-29
6. Refer to the RF Status field to view MU signal and signal disturbance information.
7. Refer to the Errors field to view MU retry information and statistics on packets not
transmitted.
Throughput The Total column displays the average total packets per second
crossing the selected MU. The Rx column displays the average
total packets per second received on the MU. The Tx column
displays the average total packets per second sent on the MU. The
number in black represents throughput for the last 30 seconds, the
number in blue represents throughput for the last hour.
Avg. Bit Speed The Total column displays the average bit speed in Mbps for a
given time period on the MU. This includes all packets sent and
received. The number in black represents average bit speed for the
last 30 seconds and the number in blue represents average bit
speed for the last hour. Consider increasing the data rate of the AP
if the current bit speed does not meet network requirements. For
more information, see Configuring the 802.11a/n or 802.11b/g/n
Radio on page 5-55. The associated MU must also be set to the
higher rate to interoperate with the
access point at that data rate.
% of Non-unicast pkts Displays the percentage of the total packets for the selected
mobile unit that are non-unicast. Non-unicast packets include
broadcast and multicast packets. The number in black represents
packets for the last 30 seconds and the number in blue represents
packets for the last hour.
Avg MU Signal Displays RF signal strength in dBm for the target MU. The number
in black represents signal information for the last 30 seconds and
the number in blue represents signal information for the last hour.
Avg MU Noise Displays RF noise for the target MU. The number in black
represents noise for the last 30 seconds, the number in blue
represents noise for the last hour.
Avg MU SNR Displays the Signal to Noise Ratio (SNR) for the target MU. The
Signal to Noise Ratio is an indication of overall RF performance on
your wireless network.
To Next Page
Loading...
Need help?
General
