8-43
AP7131>admin(network.wan.nat)> show
Description:
Displays access point NAT parameters.
Syntax:
Example:
admin(network.wan.nat)>show 2
WAN IP Mode : enable
WAN IP Address : 157.235.91.2
NAT Type : 1-to-many
Inbound Mappings : Port Forwarding
unspecified port forwarding mode : enable
unspecified port fwd. ip address : 111.223.222.1
one to many nat mapping
-------------------------------------------------------------------------------
LAN No. WAN IP
-------------------------------------------------------------------------------
1 157.235.91.2
2 157.235.91.2
admin(network.wan.nat)>
For an overview of the NAT options available using the applet (GUI), see Configuring Network Address Translation (NAT) Settings on
page 5-21.
show <idx> <cr> Displays access point NAT parameters for the specified NAT index (1-8).
To Next Page
Loading...
Need help?
General
