8-89
AP7131>admin(network.wireless.acl)> show
Description:
Displays the access point’s current ACL configuration.
Syntax:
Example:
admin(network.wireless.acl)>show summary
----------------------------------------------------------------------
ACL Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby, WLAN1
2 Admin Administration
3 Demo Room Customers
admin(network.wireless.acl)>show policy 1
Policy Name : Default
Policy Mode : allow
-----------------------------------------------------------------------------
index start mac end mac
-----------------------------------------------------------------------------
1 00A0F8348787 00A0F8348798
For information on configuring the ACL options available to the access point using the applet (GUI), see Configuring a WLAN Access
Control List (ACL) on page 5-36.
show summary Displays the list of existing MU ACL policies.
policy <index> Displays the requested MU ACL index policy.
To Next Page
Loading...
Need help?
General
