Motorola AP-7131 User Manual

System Configuration
4-17
select the IKE settings to use either RSA or DES certificates. For additional information on configuring
VPN tunnels, see Configuring VPN Tunnels on page 6-36.
Refer to your network administrator to obtain a CA certificate to import into the access point.
To import a CA certificate:
1. Select System Configuration -> Certificate Mgmt -> CA Certificates from the menu
tree.
CAUTION Loaded and signed CA certificates will be lost when changing the
access point’s firmware version using either the GUI or CLI. After a
certificate has been successfully loaded, export it to a secure location
to ensure its availability after a firmware update.
If restoring the access point’s factory default firmware, you must
export the certificate file BEFORE restoring the access point’s factory
default configuration. Import the file back after the updated firmware
is installed. For information on using the access point CLI to import
and export the access point’s configuration, see
AP7131>admin(system.cmgr)> impcert on page 8-179 and
AP7131>admin(system.cmgr)> expcert on page 8-178.
NOTE Verify the access point device time is synchronized with an NTP server
before importing a certificate to avoid issues with conflicting date/time
stamps. For more information, see Configuring Network Time Protocol
(NTP) on page 4-41.
!

Motorola AP-7131 Specifications

General

Brand	Motorola
Model	AP-7131
Category	Wireless Access Point
Language	English