MN003109A01_aa
2-32 Standard Configurations Radio Mounting
Figure 2-35. Multiple Control Heads Series Configurations - High Power
NOTE: In Multiple Control Head (MCH) installations, the yellow ignition sense wire must be
connected to the head assigned ID # 1. Section 2.2.2.4: “Setting the Initial Control Head ID”
for further information.
Use the most convenient configuration for your installation, ensuring that the combined cable lengths
do not exceed 131 feet (40 meters). See Tab l e 2 -7 for a list of available CAN cable lengths. Control
head ground, power and ignition sense wires (black, red, and yellow respectively) may need
additional length (not supplied) in installations that locate the head more than 10 feet from a power
source.
Table 2-7. Available CAN Cables
Part Number Description
HKN6164_ Cable, Remote Mount, 40 m (131 ft)
HKN6165_ Cable, Remote Mount, 35 m (115 ft)
HKN6166_ Cable, Remote Mount, 23 m (75 ft)
HKN6167_ Cable, Remote Mount, 15 m (50 ft)
HKN6168_ Cable, Remote Mount, 9 m (30 ft)
HKN6169_ Cable, Remote Mount, 5 m (17 ft)
HKN6170_ Cable, Remote Mount, 3 m (10 ft)
Draft
To Next Page
Loading...
Need help?
General