39
Registration
10. Registration
10.1 Register a handset
Up to 4 handsets can be registered to one base station. Additional handsets
must be registered to the base before you can use them.
• If the master PIN has been changed the PIN is required before you can
register or deregister handsets. The default PIN is 0000.
At the base:
1. Press and hold the P button on the base for 5 seconds. You have 120
seconds in which to register a handset.
On the handset:
1. If the handset is not register to a base press
OK
.
2.
Press locator Key for 5 sec.
is displayed, press
OK
.
3. If the PIN has been changed from 0000, enter the current 4-digit PIN code,
press
OK
.
4. If the handset is already registered to a base, press
Menu
, scroll d to
Settings
and press
OK
.
5. Scroll u to
Registration
and press
OK
.
6. The display shows
Register handset
. Press
OK
.
7.
Press locator key for 5 sec.
is displayed, press
OK
.
8. If the PIN has been changed from 0000, enter the current 4-digit PIN code,
press
OK
.
9. When the handset registers with the base, it is automatically assigned a
handset number.
10.2 Deregister a handset
1. Press
Menu
, scroll d to
Settings
and press
OK
.
2. Scroll d to
Registration
and press
OK
.
3. Scroll d to
Deregister handset
and press
OK
.
4. Scroll u or d to select the handset you want to delete and press
OK
.
5. If the PIN has been changed from 0000, enter the current 4-digit PIN code,
press
OK
.
6. A confirmation beep will be heard.
7. Press e to return to standby.
To Next Page
Loading...
Need help?
General
