5-1
Section 5
ERROR CODE DISPLAYS
1.0 Error Codes
The radio performs cursory tests to determine if its basic electronics and software are in working
order, during start-up and during operations. Problems detected during these tests are presented as
error codes on the radio display. The presence of an error code should prompt the user that a
problem exists and that a service technician should be contacted. Use the following table to aid in
understanding particular error code displays.
Table 5-1 Error Codes
Failure Display Description
MEM ERR Defective ROM.
EEP ERR Defective external EEPROM. Codeplug data is corrupted.
PLL ERR The radio cannot receive or transmit on the programmed frequencies.
To Next Page
Loading...
Need help?
General
