Motorola M802C User Manual

Using your corded base phone 25
ENGLISH
3.15 Setting the dial mode
The default-dialing mode is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1. Press MENU and then +/- to select
SETTINGS .
2. Press MENU and then +/- to select
DIAL MODE .
3. Press MENU and +/- to select
TONE or PULSE .
4. Press MENU to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily
when dialing out. After the call is ended, the dial mode will change back to pulse
automatically.
3.16 Setting the flash time
The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU and then +/- to select
SETTINGS .
2. Press MENU and then +/- to select
FLASH TIME .
3. Press MENU and then +/- to the flash time you want. (8 options are available:
90MS ,
100MS , 110MS , 250MS , 300MS , 400MS , 600MS , and 700MS )
4. Press MENU to save the setting.
3.17 Setting the area code
1. Press MENU and then +/- to select SETTINGS .
2. Press MENU and then +/- to select
AREA CODE .
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
3.18 Resetting all settings
1. Press MENU and then +/- to select RESET .
2. Press MENU and then +/- to select
ALL SETTINGS .
3. Press MENU to select
YES . All personalized settings will be reset to default.
NOTE
All of your phonebook entries, call list and redial list will remain unchanged after resetting.

Motorola M802C Specifications

General

Brand	Motorola
Model	M802C
Category	Telephone
Language	English