Using the cordless phone 37
ENGLISH
4.20.2 On or Off the Answering Machine
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
2. Press MENU and VOL+ or REDIAL/VOL- to select
ANSWERER ON
or
ANSWERER OFF
. If the
Answering Machine is turned on originally,
ANSWERER OFF
will be displayed. If the
Answering Machine is turned off originally,
ANSWERER ON
will be displayed.
3. Press MENU to confirm the setting.
4.20.3 Setting the announcement mode
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWERER MODE
.
3. Press MENU and then VOL+ or REDIAL/VOL- to select the announcement modes:
•
ANNC & RECORD
invites your callers to leave a message.
•
ANNOUNCE ONLY
lets callers hear your announcement but they cannot leave a
message.
4. Press MENU to save the setting.
4.20.4 Setting the number of rings to answer
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
RINGS TO ANSWER
.
3. Press MENU and then VOL+ or REDIAL/VOL- to select the rings to answer. (4 options
are available:
TOLL SAVER
,
3
,
4
, or
5 RINGS
).
4. Press MENU to save the setting.
NOTE
If the TOLL SAVER setting is selected, the Answering Machine will pick up after three rings
if there are new messages. If new messages have not been received, it will answer after five
rings.
4.20.5 Announcement
This is the message your callers hear on the Answering Machine. There are two pre-
recorded outgoing messages, or you can record your own message.
Recording the announcement
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ANNOUNCEMENT
.
3. Press MENU to select
RECORD
.
4. Press MENU and then VOL+ or REDIAL/VOL- to select the answer mode
ANNC & RECORD
or
ANNOUNCE ONLY
.
5. Press MENU to start recording after the beep.
6. Press MENU again to stop recording and save the message. The just saved message is
played automatically.