Motorola M802C User Manual

Using the cordless phone 39
ENGLISH
NOTE
When the Answering Machine is full, will flash if there are new messages.
ERASE SOME
ANSWERER MSG
will toggle within 2 seconds with MEMORY FULL . If this message is seen, you will
need to delete some messages to free up the memory.
4.20.9 Remote access
Remote access allows you to operate your Answering Machine and listen to your messages
by calling from external line.
To turn the remote access on/off
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
REMOTE ACCESS .
3. Press MENU and then VOL+ or REDIAL/VOL- to select
ON or OFF .
4. Press MENU to confirm the setting.
To remotely access your answering system from external line, you need to key in 4-digit
security code at the external terminal (default code is 0000).
After entering the remote access mode, press the following keys to carry out your desired
function.
4.20.10 Setting the security code
This is used to change the remote access PIN if necessary.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
SECURITY CODE .
3. Press MENU and then enter the 4-digit security code.
4. Press MENU to save the setting.
Press... To...
1 Press once to repeat the current message from the beginning.
Press twice to play the previous message.
2 Play/Stop the current message playback.
3 Skip forward to the next message.
4 Toggle Answer Off/Announce Only/Announce and Record modes.
5 Delete the message.
7 Listen to the Main Menu (for Full Voice prompts only).

Motorola M802C Specifications

General

Brand	Motorola
Model	M802C
Category	Telephone
Language	English