Motorola M802C User Manual

Using the cordless phone 35
ENGLISH
NOTE
During an external call, pressing or SPEAKER on any cordless handset will join in the call
and setup a conference call.
4.15 Setting the dial mode
The default-dialing mode is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS .
2. Press MENU to select DIAL MODE.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
TONE or PULSE .
4. Press MENU to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily
when dialing out. After the call is ended, the dial mode will change back to pulse
automatically.
4.16 Setting the flash time
The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
FLASH TIME .
3. Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want.
(8 options are available:
90 , 100 , 110 , 250 , 300 , 400 , 600 and 700MS )
4. Press MENU to save the setting.
4.17 Setting the area code
1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE .
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
4.18 Registration
4.18.1 Registering a cordless handset
To register additional cordless handsets,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION .
3. Press MENU and then VOL+ or REDIAL/VOL- to select
YES or NO .

Motorola M802C Specifications

General

Brand	Motorola
Model	M802C
Category	Telephone
Language	English