19
Using the phone
3.7 Call from the Calls Lists
Note
You need to subscribe to your network’s Call Display service to be able to see
the caller’s number in the Calls Lists.
1. Press
Menu
, the display shows
Calls Lists
and press
Select
.
2. Scroll
U or D to highlight the calls list (
Missed Calls
,
Received Calls
,
Dialed
Calls
,
Delete Calls
) you want.
3. Press
Select
..
4. Scroll
U or D to the entry you want.
5. Press
t to dial the number.
3.8 To answer a call
When you receive an external call, the phone rings and
External Call
shows on
the display.
If the handset is o the charger cradle, press
t to answer the call.
If the handset is on the charger cradle and auto talk is switched on, simply lift
the handset to answer the call.
Note
If when the handset is on the charger cradle and you would like to press
t to
answer the call you will need to switch Auto Talk o, see page 35.
3.9 To answer a call in hands-free
If the handset is o the charger cradle, press t twice to answer the call.
If the handset is on the charger cradle and auto talk is switched on, lift the
handset and press
t
.
Important
When the phone is ringing, avoid holding the earpiece too close to your ear as
it may damage your hearing. Hands-free activation can suddenly increase the
volume in the earpiece to a very high level. Make sure the handset is not too
close to your ear.
Note
To switch back to earpiece mode, press
t again during the call.
3.10 To adjust the volume
1. During a call, press U or D to adjust the earpiece or loudspeaker volume.
The level is shown in the handset display.