46
Answering machine
DTMF
Operations
code
with Voice Prompts with Outgoing Messages
7 To set answer mode No action
8 To record a new outgoing
message
No action
9 To switch answer machine o To switch answer machine o
0 To switch answer machine on To switch answer machine on
Notes
If you have any new messages they will be played after you have entered your
remote access PIN code.
If you enter an incorrect PIN code you will hear “Incorrect security code or two
beeps (error beeps). Please enter your security code”. You can try entering the
code again. If it is still incorrect you will hear the voice prompt or two beeps
(error beeps) and the O2 will hang up.
11.15 To switch remote access on / o
1. Press
Menu
, the display shows
Answer Machine
, press
Select
.
2. Scroll
D to
Answer Settings
and press
Select
.
3. Scroll
U or D to
Remote Access
and press
Select
.
4. Scroll
U or D to
O
or
On
then press
Select
.
5. Press
n to return to standby.
11.16 To change the remote access PIN
The default remote access PIN is 0000.
1. Press
Menu
, the display shows
Answer Machine
, press
Select
.
2. Scroll
D to
Answer Settings
and press
Select
.
3. Scroll
U or D to
Remote Access
and press
Select
.
4. Scroll
U or D to
Set Remote PIN
and press
Select
.
5. Enter the old 4-digit PIN and press
Save
(default setting = 0000).
6. Enter the new 4-digit PIN and press
Save
.
7. Re-enter the new PIN and press
Save
.
8. Press
n to return to standby.
Notes
This PIN is dierent from the System PIN used when resetting the unit or when
registering / de-registering handset.
It is advisable to make a note of your new PIN code and keep it somewhere
safe.
To Next Page
Loading...
Need help?
General
