35
Handset settings
8.8 To set light timeout
Set the duration of the backlight after the handset returns to standby screen.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll
D to
Light Timeout
and press
Select
.
4. Scroll
U or D to set the timeout period you want and press
Select
.
5. Press
n to return to standby mode.
8.9 To switch auto talk on / o
With Auto Talk switched on, you can answer a call just by lifting the handset
o the base or charger cradle. If switched o, you will have to press
t
to
answer a call.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll
D to
Auto Talk
and press
Select
.
4. Scroll
U or D to
O
or
On
then press
Select
.
5. Press
n to return to standby mode.
8.10 To switch key beep on / o
When you press a button on the handset, you will hear a beep. You can switch
it on or o.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll
D to
Key Beep
and press
Select
.
4. Scroll
U or D to
O
or
On
then press
Select
.
5. Press
n to return to standby mode.
8.11 To set PBX Access Code
If the phone is connected to a switchboard, you may need to enter an PBX
Access Code in the dialing sequence to be able to connect to the outside line.
The PBX Access Code will be displayed at the beginning of a number on the
screen. The code can be up to 4 digits long.
The PBX Access Code will not be used when you dial the number manually
(such as when you are not dialing from the phonebook). This allows you to
make calls to other switchboard extensions.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll
D to
PBX Access Code
and press
Select
.
4. Scroll
U or D to
O
,
On
or
Set Code
then press
Select
.
If you select
Set Code
, enter the switchboard access code e.g. 9 then press
Save
.
5. Press
n to return to standby mode.
To Next Page
Loading...
Need help?
General
