Motorola RDX SERIES User Manual

English
41
PROGRAMMING FEATURES
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
5. Long press the PTT button again to exit
Programming Mode or turn OFF the radio.
Example of Programming Active Channels
Active Channels is the fourth* Programming Mode. It
allows you to modify the number of active channels
the radio is programmed to support.
To set Active Channels:
1. Enter Advanced Configuration Mode and select
the desired channel.
2. Short press the PTT button four times to enter
the Active Channels Programming Selection
Mode. The audible voice in the radio
announces “Active Channels” and the current
value.
3. Short press the SB1 or SB2 button until you get
the number of channels desired.
4. Long press the PTT button. LED Indicator
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
5. Long press the PTT button to exit Programming
Mode or turn OFF the radio.
Note: (*) For RDU4103 it is the fifth menu.
Example of Programming Weather
Channels (Not valid for RMU4103)
Weather Channels is the last Programming mode. It
allows you to toggle a radio channel between 2 way
radio mode and weather alert mode.
To set channels to Weather Alert Mode:
1. Enter Advanced Configuration Mode and select
the desired channel.
2. Short press the PTT button five times to enter
the Weather Channels Programming Mode.
3. An audible voice announces "Weather Channel
and Frequency Used" and instructions on how
to change values. Refer to "Weather Channel
Frequencies Table" on Short press the SB1 or
SB2 button to enable/disable the feature.page
48 for the frequency table.
4. Short press the SB1 or SB2 button to enable/
disable the feature.
5. Long press the PTT button. LED Indicator
MN002895A01_final.book Page 41 Thursday, January 5, 2017 10:51 AM

Motorola RDX SERIES Specifications

General

Brand	Motorola
Model	RDX SERIES
Category	Two-Way Radio
Language	English