CHAPTER 3 AWARD
®
BIOS SETUP
3-9
CPU Internal Cache
The default value is Enabled.
Enabled (default) Enable cache
Disabled Disable cache
Note: The internal cache is built in the processor.
External Cache
Choose Enabled or Disabled. This option enables the level 2 cache
memory.
CPU L2 Cache ECC Checking
Choose Enabled or Disabled. This option enables the level 2 cache
memory ECC(error check correction).
Processor Number Feature
This option is for Pentium
®
III processor. During Enabled, this will
check the CPU Serial number. Disabled this option if you don’t want the
system to know the Serial number.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you
power on the computer. If this is set to Enabled, BIOS will shorten or skip
some check items during POST.
Enabled Enable quick POST
Disabled (default) Normal POST
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in
the sequence selected in these items. The settings are Floppy, LS/ZIP, HDD-
0/HDD-1/HDD-2/HDD-3, SCSI, CDROM, LAN, and Disabled.
Swap Floppy Drive
Switches the floppy disk drives between being designated as A and
B. Default is Disabled.