CHAPTER 3 AWARD
®
BIOS SETUP
3-16
PCI#2 Access #1 Retry
When Disabled, PCI#2 will not be disconnected until access
finishes (default). When Enabled, PCI#2 will be disconnected if max retries
are attempted without success. The default setting is Enabled.
AGP Master 1 WS Write
When Enabled, writes to the AGP (Accelerated Graphics Port) are
executed with one wait states. The default setting is Enabled.
AGP Master 1 WS Read
When Enabled, reads to the AGP (Accelerated Graphics Port) are
executed with one wait states. The default setting is Enabled.
Memory Parity/ECC Check
This item when Enabled detects the memory parity and Error
Checking & Correction. The settings are Enabled or Disabled.
To Next Page
Loading...
Need help?
General
