CHAPTER 3 AWARD
®
BIOS SETUP
3-26
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card or Modem
which supports power on functions. During Disabled, the system cannot be
boot up through LAN and ignores any incoming call from the modem.
During Enabled, the system can be boot up through LAN and modem.
RTC Alarm Resume
This function is for setting date and time for your computer to boot
up. During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm You can choose which month the
system will boot up. Set to 0, to boot
every day.
Time(hh:mm:ss) Alarm You can choose what hour, minute and
second the system will boot up.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.
Primary INTR
When this is set to On, any event occuring will awaken a system
which has been powered down.
IRQs Activity Monitoring
Primary INTR On
IRQ3 (COM 2) Primary
IRQ4 (COM 1) Primary
IRQ5 (LPT 2) Primary
IRQ6 (Floppy Disk) Primary
IRQ7 (LPT 1) Primary
IRQ8 (RTC Alarm) Disabled
IRQ9 (IRQ2 Redir) Secondary
IRQ10 (Reserved) Secondary
IRQ11 (Reserved) Secondary
IRQ12 (PS/2 Mouse) Primary
IRQ13 (Coprocessor) Primary
IRQ14 (Hard Disk) Primary
IRQ15 (Reserved) Disabled
Item Help
Menu Level >
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
To Next Page
Loading...
Need help?
General
