CHAPTER 3 AWARD
®
BIOS SETUP
3-20
Onboard Parallel Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
To operate the onboard parallel port as Standard Parallel Port only,
choose “SPP.” To operate the onboard parallel port in the ECP and SPP
modes simultaneously, choose “ECP/SPP.” By choosing “ECP”, the
onboard parallel port will operate in ECP mode only. Choosing “ECP/EPP”
will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously. The ECP mode has to use the DMA channel, so choose the
onboard parallel port with the ECP feature. After selecting it, the following
message will appear: “ECP Mode Use DMA” At this time the user can
choose between DMA channels 3 or 1. The onboard parallel port is EPP
Spec. compliant, so after the user chooses the onboard parallel port with the
EPP function, the following message will be displayed on the screen: “EPP
Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9 spec. can be
chosen.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP
mode. The settings are 3 or 1. The default setting is 3.
Parallel Port EEP Type
Select EPP port type 1.7 or 1.9.
Onboard Legacy Audio
This fields controls the onboard legacy audio.
l Sound Blaster
l SB I/O Base Address
l SB IRQ Select
l SB DMA Select
l MPU-401
l MPU-401 I/O Address
l Game Port (200-207H)
To Next Page
Loading...
Need help?
General
