3-29
BIOS Setup
PC Health Status
This section shows the status of your CPU, fan, overall system status, etc.
Monitor function is available only if there is hardware monitoring mechanism
onboard.
Chassis Intrusion Detect
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to Reset. The setting of the field will auto-
matically return to Enabled later. Setting options: Enabled, Reset, Disabled.
Current System Temp, Current CPU Temperature, Current CPU Fan
Speed, Current System Fan Speed, Vcore(V), VTT(V), 3.3V, +5V, +12V,
-12V, -5V, VBAT(V), 5VSB(V)
These items display the current status of all of the monitored hardware de-
vices/components such as CPU voltages, temperatures and all fans’ speeds.
Shutdown Temperature
If the CPU temperature reaches the limit preset in this setting, the system will
shotdown automatically. Setting options: 60℃-140℉, 65℃-149℉, 70℃-
158℉, 75℃-167℉ and Disabled.
Warning Beep
The item controls whether the system beeps when any warning such as
system overheating problem or chassis intrusion event occurs. Settings:
Enabled and Disabled.
To Next Page
Loading...
Need help?
General
