8
Section 1
CO2 CYLINDER SAFETY INFORMATION
WARNING: IN ORDER TO COMPLY WITH UK WATER REGULATIONS A WRAS
APPROVED DOUBLE NON RETURN VALVE MUST BE INSTALLED ON
THE INCOMING MAINS WATER SUPPLY BEFORE THE APPLIANCE IN THE
SYSTEM.
FOR INSTALLATION OF EQUIPMENT ACROSS EUROPE A CLASS 3
PROTECTIVE DEVICE AS DEFINED BY EN1717, APPROVED FOR THE
COUNTRY OF INSTALLATION MUST BE INSTALLED ON THE INCOMING
MAINS WATER SUPPLY BEFORE THE APPLIANCE IN THE SYSTEM.
WARNING: DO NOT DISPOSE OF THIS EQUIPMENT AS UNSORTED MUNICIPAL
WASTE, CONTACT YOUR DISTRIBUTOR OR SERVICE AGENT FOR THE
COLLECTION AND SAFE DISPOSAL OF THIS EQUIPMENT. WELBILT
(HALESOWEN) LTD. IS A REGISTERED MEMBER OF A WEEE PRODUCER
COMPLIANCE SCHEME.
DANGEROUS
WARNING
1. ALWAYS
connect the CO
2 or gas cylinder to a REDUCING VALVE.
2. NEVER
try to connect cylinder directly to product container.
3. NEVER
interconnect soft drinks, CO
2 or
gas cylinder equipment with other equipment.
4. ALWAYS
secure cylinder upright whilst in use.
5. ALWAYS
keep cylinder away from heat.
6. NEVER
drop or throw cylinders.
7. NEVER
trytounscrewttingsfromcontainers.
8. ALWAYS
ventilate area after CO
2 leakage.
This information should be displayed in a position adjacent
to the CO2 supply cylinder at all times.
To Next Page
Loading...
Need help?
General
