2200LZJE-HO-C6-N_2013.12.
Chapter 5 Maintenance
Compound 2-stage Screw Compressor 2016**C 5.7 Reassembly
5-46
Photo 074 Attaching O-ring Spacer (High-stage) Photo 075 O-ring for Balance Piston Sleeve
Photo 076 Attaching Balance Piston Sleeve Photo 077 Screwing Set Screws for Stopping
Rotation
Photo 078 Two Set Screws Have Been Screwed Photo 079 Attaching Stop Ring
c) The suction cover gaskets 【6-1】 【6-2】 are not formed symmetric laterally. Thoroughly check the
position of the drilled hole for supply oil. Lubricate the side bearing sufficiently.
Photo 080 Assembling Low-stage Suction Cover Photo 081 Assembling High-stage Suction Cover
To Next Page
Loading...
Need help?
General
