NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1
NAPCO Security Group
Programming Instructions, Volume 1 Page 5
If you do not wish to see this "Open Account" dialog in the future, you can either check Do Not Show This Message
Again located at the bottom of this dialog, or you can click File, Preferences when in the Quickloader main
screen to open the Preferences dialog (uncheck Display a dialog to unlock fire programming when a GEMC account is
opened).
How to "Lock" / How to "Unlock"
To unlock a "Locked" account, click Tools, Unlock Fire Programming, and the current Quickloader account will
Unlock, and all Fire-related fields will display as "clear" (non-red) to allow changes.
To lock an "Unlocked" account, you must simply perform an operation that will result in equivalence of the
Quickloader account and the panel programming:
Perform a full upload (or Smart Upload) from the panel into the account. This will ensure both the account and the
panel programming are the same, thus the account is set to "Locked".
Full download (or Smart Download) to the account. With the panel programming and the account programming
identical, the account is set to "Locked".
A full upload operation means the User Program Area, Dealer Program Area and Description Area selections are
all checked, as shown in the following image:
REMOTE DOWNLOADING RULES (CONT'D)
To Next Page
Loading...
Need help?
General
