EasyManuals Logo
Home>National Instruments>Software>NI-488.2 NI-488.2

National Instruments NI-488.2 NI-488.2 User Manual

National Instruments NI-488.2 NI-488.2
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Chapter 1 Introduction
© National Instruments Corporation 1-3 NI-488.2 User Manual
For high-speed (HS488) operation, the following restrictions apply:
All devices in the system must be powered on.
Cable lengths must be as short as possible with up to a maximum
of 15 m of cable for each system.
There must be at least one equivalent device load per meter of cable.
If you want to exceed these limitations, you can use a bus extender to
increase the cable length or a bus expander to increase the number of
device loads. You can order bus extenders and expanders from
National Instruments.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the National Instruments NI-488.2 NI-488.2 and is the answer not in the manual?

National Instruments NI-488.2 NI-488.2 Specifications

General IconGeneral
BrandNational Instruments
ModelNI-488.2 NI-488.2
CategorySoftware
LanguageEnglish