A-8 | ni.com
Appendix A Module/Device-Specific Information
Note For a detailed description of each signal, refer to the I/O Connector Signal
Descriptions section of Chapter 3, Connector and LED Information.
Note For more information about default NI-DAQmx counter inputs, refer to
Connecting Counter Signals in the NI-DAQmx Help or the LabVIEW Help.
USB-6221 Screw Terminal Important Links
The following list contains links specific to your DAQ device:
• Specifications—Refer to the NI 6221 Specifications for more detailed information about
the USB-6221 Screw Terminal device.
• LED Patterns—Refer to the
LED Patterns section of Chapter 3, Connector and LED
Information
, for information about the USB-6221 Screw Terminal LEDs.
• Fuse Replacement—Refer to the USB Device Fuse Replacement section of Chapter 1,
Getting Started, for information about replacing the fuse on the USB-6221 Screw Terminal.
• Accessory Options—Refer to the USB Device Accessories, USB Cable, and Power Supply
section of Chapter 2, DAQ System Overview, for more information.
CTR 1 SRC 76 (PFI 3)
CTR 1 GATE 77 (PFI 4)
CTR 1 AUX 87 (PFI 11)
CTR 1 OUT 91 (PFI 13)
CTR 1 A 76 (PFI 3)
CTR 1 Z 77 (PFI 4)
CTR 1 B 87 (PFI 11)
FREQ OUT 93 (PFI 14)
Table A-3. Default NI-DAQmx Counter/Timer Pins (Continued)
Counter/Timer Signal Default Pin Number (Name)
To Next Page
Loading...
Need help?
General
