© National Instruments | 3-1
3
Connector and LED
Information
The I/O Connector Signal Descriptions, +5 V Power Source, and USER 1 and USER 2 sections
contain information about M Series connector signals, power, and user-defined terminals. The
LED Patterns section contains information about M Series USB device LEDs.
Note Refer to Appendix A,
Module/Device-Specific Information, for device I/O
connector pinouts.
I/O Connector Signal Descriptions
Table 3-1 describes the signals found on the I/O connectors. Not all signals are available on all
devices.
To Next Page
Loading...
Need help?
General
