NEC MultiSync P403 User Manual

English-10
Wireless Remote Control
쐃 POWER button
Switches the power on/standby.
쐇 INPUT button
Selects input signal.
DVI: DVI
HDMI: HDMI, HDMI2*
2
, HDMI3*
2
DisplayPort: DPORT
VGA: VGA
Y/Pb/Pr: Y/Pb/Pr, SCART*
2
, Y/Pb/Pr2*
2
RGB/HV*
2
: RGB/HV
VIDEO*
2
: VIDEO, S-VIDEO
OPTION: Depends on your connection
쐋 PICTURE MODE button
Selects picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [CUSTOM1], [CUSTOM2]. See page 18.
HIGHBRIGHT: for moving images such as DVD.
STANDARD: for images.
sRGB: for text based images.
CINEMA: for movies.
CUSTOM1 and CUSTOM2: activate auto dimming
function. See page 29.
쐏 ASPECT button
Selects picture aspect, [FULL], [WIDE], [DYNAMIC], [1:1],
[ZOOM] and [NORMAL]. See page 17.
쐄 AUDIO INPUT button
Selects audio input source [IN1], [IN2], [IN3]*
2
, [OPTION]*
2
,
[HDMI], [DPORT], [HDMI2]*
2
, [DPORT2]*
2
, [DPORT3]*
2
.
쐂 OPTION MENU button*
1
쐆 KEYPAD
Press buttons to set and change passwords, change channel
and set REMOTE ID.
쐊 ENT button*
1
쐎 DISPLAY button
Turns on/off the information OSD. See page 18.
쐅 MENU button
Turns on/off the menu mode.
쐈 AUTO SET UP button
Enters auto setup menu. See page 20.
쐉 EXIT button
Returns to previous menu within OSD menu.
씈 UP/DOWN button ( / )
Acts as
button to move the highlighted area up or down
to select adjustment items within OSD menu.
Small screen which adjusted “PIP” mode moves up or down.
씉 MINUS/PLUS (-/+) button
Increases or decreases the adjustment level within OSD
menu settings.
Small screen which adjusted “PIP” mode moves left or right
and increases or decreases the size.
씊 SET/POINT ZOOM button
Makes selection. Activates POINT ZOOM function when OSD
menu is not shown.
씋 VOLUME UP/DOWN button (VOL +/-)
Increases or decreases audio output level.
씌 CH/ZOOM UP/DOWN button (CH/ZOOM +/-)*
1
Increases or decreases POINT ZOOM level.
씍 GUIDE button*
1
씎 MUTE button
Turns on/off mute function.
씏 STILL button
ON/OFF button: Activates/deactivates still picture mode.
STILL CAPTURE button: Captures still picture.
NOTE: This function is released when activating IMAGE
FLIP.
IMAGE FLIP button
Toggle switches between H FLIP, V FLIP, 180° ROTATE and
NONE. See page 21.

NEC MultiSync P403 Specifications

General

Panel life	- h
Panel type	SPVA
Pixel pitch	- mm
Response time	8 ms
Display diagonal	40 \
Display brightness	700 cd/m²
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
LED backlighting type	Edge-LED
Contrast ratio (typical)	4000:1
Display number of colors	-
Display diagonal (metric)	101.6 cm
Active display area (W x H)	885.6 x 498.15 mm
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 3840 x 2160, 4096 x 2160
Ethernet LAN (RJ-45) ports	2
Product color	Black
Product design	Digital signage flat panel
Bezel width (bottom)	15.5 mm
Panel mounting interface	300 x 300 mm
Compatible products	C-tick; CE; FCC Class B; PSB; TÜV GS; UL/C-UL or CSA; VCCI
Operating hours (hours/days)	24/7
Sustainability certificates	RoHS
RMS rated power	20 W
Power consumption (standby)	1 W
Power consumption (typical)	135 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, DVI
Certification	C-tick; CE; FCC;' PSB; RoHS; TÜV GS; UL/C-UL CSA; VCCI

Weight and Dimensions

Depth	66.5 mm
Width	920.6 mm
Height	532.2 mm
Weight	17000 g