English
English−33
Operating Range for the Optional Remote Control
Point the top of the remote control toward the monitor’s remote control sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.) from the
remote control sensor, or at a horizontal and vertical angle of within
30° and within a distance of about 3.5 m (10 ft.).
NOTE: The remote control system may not function when direct
sunlight or strong illumination strikes the remote control
sensor, or when there is an object in the path.
Handling the remote control
• Do not expose to strong shock.
• Do not allow water or other liquid to splash on the remote control.
If the remote control gets wet, wipe it dry immediately.
• Avoid exposure to heat and steam.
• Except to install the batteries, do not open the remote control.
Using Power Management
This monitor follows the VESA approved DPM (Display Power Management) function. This function decreases the power
consumption of the monitor when it is not in use.
When connected to a computer, power consumption by the monitor reduces automatically if the keyboard or mouse are not used
during the time set in the computer’s power management settings. Refer to your computer’s user manual for more information.
When connected to an AV source, such as a Blu-ray, DVD, or streaming video player, power consumption by the monitor
reduces automatically after a certain amount of time has passed since the monitor recognized “no signal input”. This option is
turned on or off in the [POWER SAVE] settings under the [PROTECT] menu of the OSD. See
page 116.
NOTE: • Depending on the computer and display card used, this function may not operate.
• After the video signal is lost, the monitor automatically goes into off at a preset time period. Please refer to the
[AUTO POWER SAVE TIME SETTING] in [POWER SAVE] page 116.
• Schedules can be created for the monitor to power on or off at specific times. See page 46.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
