To Next Page

To Previous Page

English

English−111

MULTI-INPUT MENU

DisplayPort Selects the DisplayPort mode [1.1a] or [1.2].

DisplayPort 1.1a is selected, [SST] is set automatically.

DisplayPort 1.2 is selected, set [SST] or [MST*].

* DisplayPort 1.2 should be selected when using Multi-Stream Transport. Multi-Stream Transport requires a

corresponding display card. Contact your supplier for limitations of this function.

NOTE: MST is not available with DisplayPort2 signal input.

BIT RATE DisplayPort 1.1a is selected at DisplayPort, [HBR] is set automatically.

DisplayPort1.2 and SST are selected at DisplayPort, set [HBR] or [HBR2].

DisplayPort1.2 and MST are selected at DisplayPort, [HBR2] is set automatically.

HDMI Sets the HDMI mode.

MODE1: Max resolution is 3840 x 2160 (30 Hz).

MODE2: Max resolution is 3840 x 2160 (60 Hz), HDCP 2.2, or HDR.

VIDEO LEVEL Adjust the gradation range to be displayed according to the video signal to improve the whiteout and blackout

of the image.

RAW: For computer settings. Show all input signals of 0-255 gray levels.

EXPAND: For audio-visual equipment settings. Expands the input signals from 16-235 gray levels to

0-255 gray levels.

AUTO: Automatically sets input signals by adjusting connected equipment.

NOTE: This function is available only in [HDMI] or [DisplayPort] or [OPTION] and is selected at [INPUT

SIGNAL].

SIGNAL FORMAT

HDMI1, HDMI2, DisplayPort1,

DisplayPort2, COMPUTE MODULE,

OPTION only

Selects the color space setting and RBG for the HDMI/DisplayPort signal.

NOTE: If [SLOT2 CH SETTING] is [CH2], this function is grayed out.

RESET Resets MULTI INPUT options back to factory settings, except for [INPUT DETECT] (priority of input signals

only), [INPUT CHANGE] (INPUT1 and INPUT2), [INPUT SELECT], [PICTURE ASPECT] and [BIT RATE].

OSD

OSD MENU

LANGUAGE Select the language used by the OSD.

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

SVENSKA

РУССКИЙ

OSD TIME Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.

OSD POSITION Determines the location where the OSD appears on the screen.

DOWN

RIGHT

LEFT

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync UN552V and is the answer not in the manual?

NEC MultiSync UN552V Specifications

General

Pixel pitch	0.63 x 0.63 mm
Response time	8 ms
Display diagonal	55 \
Display brightness	500 cd/m²
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	23 - 86 Hz
Horizontal scan range	26 - 134 kHz
Contrast ratio (typical)	1700:1
Display diagonal (metric)	138.78 cm
Active display area (W x H)	1209.63 x 680.34 mm
Operating hours (hours/days)	24/7
Maximum refresh rate	60 Hz
Annual energy consumption	328 kWh
Purpose	Universal
Orientation	Horizontal/Vertical
Product color	Black
Product design	Video wall
Placement supported	Indoor
Bezel width (bottom)	0.44 mm
Panel mounting interface	400 x 400 mm
USB ports quantity	5
DisplayPorts quantity	3
Compatible memory cards	MicroSD (TransFlash)
Ethernet LAN data rates	10, 100 Mbit/s
VGA (D-Sub) input ports	1
HDMI input ports quantity	2
Audio formats supported	AAC, MP3, WAV
Image formats supported	JPG, PNG
Video formats supported	FLV, H.264, MOV, MP4, MPG, WMV
Power consumption (standby)	0.5 W
Power consumption (typical)	225 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Certification	BSMI; CE; EAC; EMC B; FCC; PSB; RCM; REACH; RoHS; SASO; TÜV GS; TÜV S; UL/C-UL; VCCI
Sustainability certificates	RoHS
Cables included	AC, DisplayPort, HDMI
Harmonized System (HS) code	85285210