EasyManuals Logo
Home>NEC>Monitor>MultiSync V552

NEC MultiSync V552 User Manual

NEC MultiSync V552
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
English-27
English
ADVANCED OPTION
INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices are
connected.
NONE
NONE
The Monitor will not search the other video input ports.
FIRST DETECT When the current video input signal is not present, then the monitor searches for a video signal
from the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
LAST DETECT When the monitor is displaying a signal from the current source and a new secondary source
is supplied to the monitor, the monitor will automatically switch to the new video source. When
current video input signal is not present, the monitor searches for a video signal from the other
video input port. If the video signal is present in the other port, then the monitor switches the
video source input port to the new found video source automatically.
VIDEO DETECT
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over DVI, VGA,
RGB/HV.
When HDMI, DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input signal is present the monitor
will change and keep to the HDMI, DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input.
CUSTOM DETECT Set the priority of input signals.
When CUSTOM DETECT is selected, monitor searches listed inputs only.
NOTE: OPTION input signal is only available to be set to PRIORITY5.
INPUT CHANGE Sets input change speed.
NOTE: When “QUICK” is selected, picture may be distorted when signal input is changed.
This function should be chosen after all adjustment options have been made for the input.
NORMAL
TERMINAL SETTING
DVI MODE
Selects the kind of DVI-D equipment which is connected to the DVI input. Select “DVI-PC” when
PC or other computer equipment is connected. Select “DVI-HD” when DVD player, which has
DVI-D output, is connected.
DVI-PC
BNC MODE Selects the type of signal associated with the BNC input.
RGB: Analog input (R, G, B, H, V)
COMPONENT: Component (Y, Cb/Pb, Cr/Pr)
SCART: SCART signal
VIDEO: Composite video (VIDEO2)
S-VIDEO: Separate video
RGB
HDMI SIGNAL RAW: Disable the expanded feature.
EXPAND: Expand image contrast and increase detail in the dark and bright areas.
EXPAND
DEINTERLACE Selects the IP (Interlace to Progressive) conversion function.
Note: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu.
ON
ON
Converts interlaced signals to progressive. This is the default setting.
OFF Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of
image retention.
COLOR SYSTEM
VIDEO1, VIDEO2, S-VIDEO inputs only
The selected Color System depends on the video format of the input signal. AUTO
AUTO
Automatically chooses Color System setting based on input signal.
NTSC
PAL
SECAM
4.43 NTSC
PAL-60

Other manuals for NEC MultiSync V552

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync V552 and is the answer not in the manual?

NEC MultiSync V552 Specifications

General IconGeneral
Panel life- h
Pixel pitch0.63 x 0.63 mm
Response time8 ms
Display diagonal55 \
Display brightness430 cd/m²
Display technologyLCD
Native aspect ratio16:9
Vertical scan range50 - 85 Hz
Horizontal scan range31.5 - 91.1 kHz
LED backlighting typeEdge-Lit LED
Supported video modes1080p
Touchscreen technologyInfrared
Display number of colors16.78 million colors
Active display area (W x H)1209.6 x 680.4 mm
OrientationHorizontal/Vertical
Product colorBlack
Product designDigital signage flat panel
Bezel width (top)41.4 mm
Panel mounting interface300 x 300 mm
Wi-Fi-
DVI-D ports quantity2
Cable lock slot typeKensington
Power consumption (standby)2 W
Power consumption (typical)100 W
Package depth250 mm
Package width1430 mm
Package height920 mm
Operating altitude0 - 3000 m
Non-operating altitude3000 - 12192 m
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
RMS rated power10 W
Cables includedAC, DVI
Weight and Dimensions IconWeight and Dimensions
Depth86.5 mm
Width1294.4 mm
Height765.2 mm
Weight40800 g

Related product manuals