NEC SV9100 Communication System
46 SV9100 – InUC User Guide
In the following example (refer to Figure 77 Service Access – Call Forward Screen on page 46), the user currently
has Call Forward Busy/No Answer set to the InMail pilot, extension 5999.
Figure 77: Service Access – Call Forward Screen
Do Not Disturb
The Do Not Disturb screen has three different sections:
The Status section – shows the current Do Not Disturb setting.
The Action section – choose Set to set Do Not Disturb or Clear to cancel Do Not Disturb.
The Type section – set the Do Not Disturb Type. When complete, click OK to execute the setting.
In the following example, the user currently has Do Not Disturb set for internal calls only.
Figure 78: Service Access – Do Not Disturb Screen