NEFF B46C74.3 User Manual

10
Optional accessories
You can purchase optional accessories from the after-sales
service or specialist retailers. A comprehensive range of
products for your appliance can be found in our brochures or
on our home page.
Before using the appliance for the first time
Once your new appliance has been connected, "Select
language" appears in the text display. Before you can use the
appliance, you must make some settings:
■ Set the language
■ Set the water hardness
■ Calibrate the altitude
■ Set the time of day
■ Clean the appliance before using it for the first time.
Note: You can correct these settings at any time. To change
the language, water hardness and altitude calibration,
see section: Changing basic settings; to change the time, see
section: Electronic clock.
Setting the language
"Select language English" is preset. If necessary, set another
language for the text display.
1. Turn the temperature selector until the language you require
appears on the text display.
2. Press and hold the ± info button for 3 seconds.
Your setting is saved. "Water hardness 3 - hard" appears in
the text display.
Setting the water hardness
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or uncarbonated
mineral water.
"Water hardness 3 - hard" is preset. Change this setting if your
water is softer.
You can use the test strip supplied to determine the water
hardness, or you can ask your water supplier.
Notes
■ If your water is very hard, we recommend that you use
softened water.
■ If you use only softened water, you can set your appliance to
"Water hardness (softened)".
■ If you use mineral water, set the hardness to "Water hardness
3 - hard".
■ If you use mineral water, you must only use non-carbonated
mineral water (see section "Filling and emptying the water
tank").
1. Use the temperature selector to set the water hardness.
2. Press and hold the ± info button for 3 seconds.
Your setting is saved. "Altitude calibration 0 - 300 m" is
shown in the text display.
Accessories Order no.
Mega system steamer N8642X3
Universal pan, enamelled Z1232X3
Universal pan, non-stick Z1233X3
Universal pan with wire insert Z1242X3
Wire insert for roasting and grilling, to be
used in the universal pan
740766
Extra-deep roasting pan, enamelled Z1272X0
Baking tray, aluminium Z1332X0
Baking tray, enamelled Z1342X0
Baking tray, non-stick Z1343X0
Pizza tray Z1352X0
Baking and roasting wire rack Z1432X3
Roasting tray, enamelled, two-piece Z1512X0
VarioCLOU® telescopic shelf with full exten-
sion
Z1785X3
Bread-baking stone Z1913X0
Accessories Order no.
6HOHFWODQJXDJH
(QJOLVK
Water hardness Setting symbol (temperature
display)
softened
™†‹
1  soft
™†‚
2  medium
™†ƒ
3  hard
™†„

NEFF B46C74.3 Specifications

General

Brand	NEFF
Model	B46C74.3
Category	Oven
Language	English