8
2.3 Display
The main user display is shown in the following figure:
• Use the four blue function buttons (A) to navigate the various menus of the user display.
• Press the escape button (B) to exit the current menu.
• Press the green Start/Stop button (C) to start or stop jobs.
Note
Throughout this manual, the term “select” is used to indicate that you have to push the
blue function button next to the required command; for example, select , means that
you have to push the function button (A) next to the icon . See above figure.
Note
When the machine is running, the word “clear” will be displayed at the bottom right- hand
corner of the screen. Selecting “clear” will clear the document path, and prepare the
machine for a new job.
Caution
The display is covered with a thin plastic layer. To avoid permanent damage to the
display, do not allow sharp objects to come in contact with this display.
START
STOP
ESC
A
BC
ESC
START
STOP
To Next Page
Loading...
Need help?
General
