Network Settings
23
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
9. (Optional) Select any item in the IGMP Snooping Static Router Port menu.
You can select a port to be the dedicated IGMP snooping static router port if no IGMP
query exists in the network for the switch to discover the router port dynamically
. After a
port is selected as the static router port, all IGMP Join and Leave reports are forwarded to
it. Only some switch models support any setting in this field.
10. Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Customize IGMP Snooping
By default, IGMP snooping is enabled. You can customize the settings for your network.
To customize IGMP snooping:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > Multicast.
7. Select the IGMP Snooping Status Enable radio button.
8. (Optional) Select the V
alidate IGMPv3 IP header Enable radio button.
To Next Page
Loading...
Need help?
General
