Network Settings
25
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
5. Select System > Multicast.
6. Make sure that the IGMP Snooping Status Enable radio button is selected.
7. In the VLAN ID Enabled for IGMP Snooping field, type the name of the VLAN.
8. Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify a VLAN for IGMP
Snooping
To specify a VLAN for IGMP snooping:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
To Next Page
Loading...
Need help?
General
