NETGEAR Tri-band Mesh WiFi 6 Router User Manual

Table 4. Factory default settings for the router (Continued)
Default SettingFeature
DisabledInbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
EnabledWiFi communicationWiFi
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
1
Transmission speed
United States of America;
otherwise, varies by region
Country/region
AutoRF channel 2.4 GHz
Fronthaul: Channel 44
Backhaul:
•
Channel 153 for NA, PR, AU, CA,
and TW
•
Channel 108 for EU, KO, and IN
RF channel 5 GHz
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Factory settings for satellite model MS80
The following table shows the factory default settings for the satellite.
Table 5. Factory default settings for the satellite
Default SettingFeature
http://www.routerlogin.netUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
User Manual145Supplemental Information
Nighthawk Tri-band Mesh WiFi 6

NETGEAR Tri-band Mesh WiFi 6 Router Specifications

General

Brand	NETGEAR
Model	Tri-band Mesh WiFi 6 Router
Category	Network Router
Language	English