NETGEAR Tri-band Mesh WiFi 6 Router User Manual

Activate and manage NETGEAR Armor using
the Nighthawk app
NETGEAR Armor
™
is an advanced multi-layer cyber security solution that protects not
only your network but individual devices as well. NETGEAR Armor protects your devices
from viruses, spyware, hackers, spam, and phishing.
For more information about NETGEAR Armor, visit
netgear.com/landings/armor/default.aspx.
Use the NETGEAR Nighthawk app to activate and manage NETGEAR Armor. The
Nighthawk app is available on the Google Play™ store and the Apple App Store®.
To activate Armor using the Nighthawk app:
1. Launch the Nighthawk app.
The dashboard displays.
2. Tap Security.
The Armor page displays.
3. Follow the onscreen instructions to set up Armor.
Network access control list
You can use the network access control list (ACL) on the router to block or allow access
to your network and the Internet. The ACL identifies a WiFi or wired device by its MAC
address. The router detects the MAC addresses of the devices on the network and either
allows or denies access.
The router detects and stores the MAC addresses of devices that connect to the network,
so it lists the MAC addresses both of devices that are currently connected and any that
were previously connected.
If you set up a network ACL that allows all new devices to connect, the following applies:
•
You can either select or manually enter devices that you want to block from
connecting to the network.
•
All other devices are allowed access to the network.
If you set up a network ACL that blocks all new devices from connecting, the following
applies:
•
You can either select or manually enter devices that you want to allow access to the
network.
User Manual42Control Access to the Internet
Nighthawk Tri-band Mesh WiFi 6

NETGEAR Tri-band Mesh WiFi 6 Router Specifications

General

Brand	NETGEAR
Model	Tri-band Mesh WiFi 6 Router
Category	Network Router
Language	English