NETGEAR Tri-band Mesh WiFi 6 Router User Manual

5.
In the Wireless Network (2.4Ghz b/g/n/ax section, select or clear the Enable 20/40
MHz Coexistence check box.
Selecting this check box enables 20/40 MHz coexistence and clearing this check
box disables 20/40 MHz coexistence.
By default, 20/40 MHz coexistence is enabled and the check box is selected.
6. Click the Apply button.
Your settings are saved. The 2.4 GHz radio restarts and WiFi clients might need to
reconnect.
Hide your mesh network’s SSID
By default, your mesh network’s WiFi network name (SSID) is broadcasted and visible
to other WiFi devices. If you disable SSID broadcasting on your mesh network, the SSID
is no longer visible. However, other devices can still connect to the mesh network
manually if the SSID, security type, and WiFi password is known.
To hide your mesh network’s SSID:
1.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Setup page displays.
5. Clear the Enable SSID Broadcast check box.
Clearing this check box hides the SSID.
6. Click the Apply button.
Your settings are saved.
User Manual67Manage WiFi Settings
Nighthawk Tri-band Mesh WiFi 6

NETGEAR Tri-band Mesh WiFi 6 Router Specifications

General

Brand	NETGEAR
Model	Tri-band Mesh WiFi 6 Router
Category	Network Router
Language	English