Advanced Settings
83
N300 Wireless Router WNR2000v4
By default, this check box is selected. However, when the check box is selected, some
applications such as Network Explorer in Windows Vista might not detect the router.
CAUTION: When you clear this check box and you add a new wireless
client through WPS, the router’s wireless settings change to an
automatically generated SSID and passphrase (also referred
to as the wireless network password or network key).
6. Click the Apply button.
Wireless Access Point (AP)
The router can function in access point (AP) mode instead of regular router mode. In AP
mode, the router can function as a bridge between wireless clients and another router or
gateway in your network that connects to the Internet. When the router functions in AP mode,
many router functions are disabled, but wireless clients can connect to the router, and you
can still access the router to change the configuration, for example, to disable AP mode and
return to regular router mode.
To enable and configure AP mode:
1. Select Advanced >
Advanced Setup > Wireless AP.
The Wireless Access Point screen displays:
2. Select the Enable Access Point Mode check box.
The screen adjusts.
To Next Page
Loading...
Need help?
General
