Advanced Settings
87
N300 Wireless Router WNR2000v4
6. Click the Apply button.
Set Up a Repeater
Use a wired Ethernet connection to set up the repeater to avoid conflicts with the wireless
connection to the base station.
Note: If you set up the your router as a base station with a non-NETGEAR
access point as the repeater, you might need to change additional
configuration settings. In particular, you should disable the DHCP
server function on the access point that functions as the repeater.
To configure the router as a repeater:
1. Select Advanced >
Advanced Setup > Wireless Repeating Function.
The Wireless Repeating Function screen displays. The wireless MAC address of the
router is displayed onscreen.
2. Select the Enable W
ireless Repeating Function check box.
3. Select the W
ireless Repeater radio button.
4. Fill in the Repeater IP Address field.
This IP address has to be in the same subnet as the base station, but different from the
LAN IP address of the base station.
To Next Page
Loading...
Need help?
General
