Menu 6 - Scheduling
OVERVIEW
6.1 - Holiday
6.2 - Scheduling
MENU 6.1 - HOLIDAY
In this menu, you schedule longer changes in heating
and hot water temperature.
You can also schedule settings for certain installed ac-
cessories.
If a room sensor is installed and activated, the desired
room temperature (°C) is set during the time period.
If a room sensor is not activated, the desired offset of
the heating curve is set. One step is usually enough to
change the room temperature by one degree, but in
some cases several steps may be required.
TIP
Complete holiday setting about a day before
your return so that room temperature and hot
water have time to regain usual levels.
Caution
Holiday settings finish on the selected date. If
you want to repeat the holiday setting once
the end date has passed, go into the menu and
change the date.
MENU 6.2 - SCHEDULING
In this menu, you schedule repeated changes in heating
and hot water.
You can also schedule settings for certain installed ac-
cessories.
If a room sensor is installed and activated, the desired
room temperature (°C) is set during the time period.
If a room sensor is not activated, the desired offset of
the heating curve is set. One step is usually enough to
change the room temperature by one degree, but in
some cases several steps may be required.
Caution
A schedule repeats according to the selected
setting (e.g. every Monday) until you go into
the menu and switch it off.
49Chapter 9 | Control - MenusNIBE S1255
To Next Page
Loading...
Need help?
General
