CBOX1050
Installation and Programming Manual
44
support.hysecurity.com
(P/N
75500019)
(P/N OXIBD/A)
(P/N MX4257)
(P/N EPMB/A)
(P/N 911)
(P/N 273C)
(P/N ABF/A)
1050 CONTROL BOX PARTS LIST
PART# DESCRIPTION QTY
CBOX1050 Control Box with 1050 Control Board 1
OXIBD/A Multi-Channel Plug-in Receiver 1
ABF/A Antenna for Multi-Channel Plug-in Receiver 1
273C Gate Warning Signs (UL Requirement) 2
75500019 Cable Ties (for Warning Signs) 4
911 Audio Alarm (UL Requirement) 1
EPMB/A or
MX4257
Photo eye (UL Requirement): Either Thru-
Beam pair (P/N EPMB/A) or reective
photo eye (P/N MX4257).
1
SECTION 2: 1050 CONTROL BOX PARTS IDENTIFICATION
(P/N CBOX1050)
1050 SYSTEM SPECIFICATIONS
Open/Close Time (To 90°) 14 - 16 Seconds
Max. Degree Of Opening Standard install = 105°, Special install = 120°
Solar Compatible YES
Operating Temperature -4º to 122º F (-20º to 50º C)
Box Weight 19.75 lb (8.96 kg)
Dimensions 8.5” x 18.25”x18.25”
Push-To-Open Installation YES
Pull-To-Open Installation YES
Number Of Gates Controlled Singe gate or dual gate
Sensor Type Inputs Edge, Photo Eye, and Ground Loops
DC Voltage Input Main DC Power In: 10-35 VDC, Solar In: 10-35 VDC, 30A Max.
Battery Power 12 or 24 VDC
Included Sensors Photo Eye TX/RX Through Beam Pair or Alternative Reective Photo Eye
User Controls 1050 Control Board: Open, Close, Stop, Reset
Enclosure CBOX: Type 3R, 18wX18hX8d (46wX46hX20.3)
Accessory Connectors Power, Mag Lock, Lamp, Alarm, Loops, Edge, Exit, Guard Station, Fire, BlueBUS
Relays Two programmable relays
Ul 325 Certication Usage Class I, II, III, IV
ACTUATOR SPECIFICATIONS
SPEC TYPE
1551 SYSTEM TITAN12L SYSTEM 3501 SYSTEM
816 ACTUATOR 912L ACTUATOR 3500 ARTICULATING ARM
Drive Type Electromechanical Screw Electromechanical Screw Electromechanical Articulated Arm
Open/Close Time 14 - 16 Seconds 14 - 16 Seconds 12 - 20 seconds
Gate Max Length
and Weight
16 foot (4.9m) leaf @ up
to 600 lb. (272 kg)
• 20 foot (6m) leaf @ up to 600 lb. (272 kg)
• 8 ft (2.4 m) leaf @ up to 1000 lb (453 kg)
20 foot (6m) leaf @ up to 1000 lb
(272 kg)
Actuator Lengths
(from mount hole to
mount hole)
41 inches (104 cm)
retracted
67 inches (170 cm)
extended
43 inches (176.5 cm) retracted
69.5 inches (103.3 cm) extended
Articulating Arm Chassis
(WxHxD): 17.8 x 12 x 8.3 inches
(45x30.4x21 cm)
NOTICE
Some purchased systems may include a minimum specified 12V battery as part of the kit.