Nice planotime User Manual

2
Contents: page
1 Description 3
1.1 What’s PLANOTIME 3
1.2 Is it necessary to program the unit? 3
1.3 What’s an event? 3
1.4 What are “groups”? 4
1.5 What are special commands? 4
2 Installation 4
2.1 Switching on PLANOTIME 4
2.2 Initial setting of the timer 5
2.3 Memorizing PLANOTIME 5
in the automation receivers
2.3.1 Memorizing PLANOTIME 6
as the first transmitter
2.3.2 Memorizing PLANOTIME 6
as an additional transmitter
2.4 Mounting PLANOTIME 7
3 Symbol description 8
4 How to use PLANOTIME 9
4.1 Selecting the operating modes 9
4.2 “Automatic” mode operation 10
4.3 “Nicetime” mode operation 10
4.4 Manual” mode operation 10
4.5 Operation in “Manual with recorder” mode 11
page
5 How to program PLANOTIME 12
5.1 Selecting the type of programming 12
5.1.1 Forward and backward for programming 12
5.2 Programming the “events” 13
5.2.1 Programming: new event 14
5.2.2 Programming: event modification 16
5.2.3 Programming: deleting events 16
5.2.4 Programming: copying events 17
5.3 Timer settings 17
5.4 Settings of special command 18
"holiday" parameters
5.5 Settings of special command 18
"planetary time" parameters
6 Battery replacement 19
7 Warnings 19
8 How to… 20
8.1 Error list 20
9 Technical specifications 21
A1 Appendix 21
Tables: page
Table No. 1: setting the timer after connecting 5
the battery
Table No. 2: selecting “manual” mode and 5
choosing a group
Table No. 3: sending a command to the same 5
group
Table No. 4: selecting another group 5
Table No. 5: abandoning the “manual” mode: 6
Table No. 6: memorizing PLANOTIME 6
as the first transmitter
Table No. 7: memorizing PLANOTIME 6
as an additional transmitter
Table No. 8: List of symbols found in area 1 8
Table No. 9: List of symbols found in area 2 8
Table No. 10: List of symbols found in area 3 9
Table No. 11: selecting the “automatic” mode 10
Table No. 12: abandoning the “automatic” mode 10
to return to the selection menu
Table No. 13: switching from “automatic” mode 10
to “Nicetime” mode
Table No. 14: selecting the “manual” mode 10
Table No. 15: selecting a group and sending a 10
command
Table No. 16: sending a command to the same 10
group
page
Table No. 17: selecting another group 11
Table No. 18: assembling a multiple group 11
and sending a command
Table No. 19: sending a special command 11
to a group or multiple group
Table No. 20: abandoning the “manual” mode and 11
returning to the selection menu:
Table No. 21: selecting the “manual with recorder” 11
mode
Table No. 22: properties of the events: 13
Table No. 23: programming a simple “new event” 14
Table No. 24:
programming a complete “new event” 15
Table No. 25: modifying an event 16
Table No. 26: deleting an event 16
Table No. 27: programming an event by copying 17
one already present
Table No. 28: setting the timer 17
Table No. 29: setting parameters of special 18
command “holiday”
Table No. 30: setting the parameters of the 18
special command “planetary time”
Table No. 31: error list 20

Nice planotime Specifications

General

Brand	Nice
Model	planotime
Category	Remote Control
Language	English