116
T
❚❚ Changing the Password
The password can be changed as described below. The pass-
word can only be changed when WPA2-PSK-AES is selected for
Authentication/encryption in the Wi-Fi menu.
1
Select Wi-Fi connection type > Password.
2
Enter a password.
The text-entry dialog shown at right
will be displayed with the current pass-
word (by default, “NIKON_J5”) in the
password area. Tap to highlight char-
acters in the password area or rotate
the command dial to move the cursor.
To enter a new character at the current
cursor position, tap the keys in the key-
board area or highlight characters
using the multi selector and press
J
.
To switch between lower and upper case, numbers, and sym-
bols, press the
Fn
button or tap the shift key.
Passwords can be from 8 to 36 charac-
ters long. After entering the password,
tap N. The password can be viewed
at any time by selecting Current set-
tings in the Wi-Fi menu.
Select Wi-Fi connection type in the
Wi-Fi menu, then highlight Password
and press J.
Shift key
Password area
Keyboard area
To Next Page
Loading...
Need help?
General
