192
i
Choose a flash control mode for the built-in flash.
Flash compensation alters flash output
from the level suggested by the camera,
changing the brightness of the main sub-
ject relative to the background. Choose
from values between –3 EV (darker) and
+1 EV (brighter) in increments of
1
/
3 EV; in
general, positive values make the subject brighter while nega-
tive values make it darker.
A Y icon is displayed when flash com-
pensation is in effect. Normal flash out-
put can be restored by setting flash
compensation to ±0. Flash compensa-
tion is not reset when the camera is
turned off.
Flash Control
1
TTL
Flash output is adjusted automatically in response to
shooting conditions (i-TTL flash control).
2
Manual
Choose a flash level between
Full
and
1/32
(
1
/
32
of full power). At full
power, the built-in flash has a guide
number of about 5/16 (m/ft, ISO
100, 20 °C/68 °F; at ISO 160, the
guide number is about 6.3/20.7).
A Y icon flashes in the display
during flash photography when
this option is selected.
Flash Compensation
To Next Page
Loading...
Need help?
General
