109
Setup Menu
Basic Camera Setup
d Blink Warning
Set whether or not to detect human subjects with eyes closed when shooting
pictures using face detection (A 24) in the following situations.
• G (Easy auto) mode
• Portrait (A 36) or Night portrait (A 37) scene modes
Operating the Did someone blink? Screen
The following operations are available when the Did
someone blink? screen is displayed.
If no operations are performed for a few seconds, the
screen automatically returns to the shooting mode
screen.
Press the d button M z (Setup menu) (A 93) M d Blink warning
On
When the camera detects that one or more human subjects have closed their eyes
shortly after detecting the faces and shooting them, the Did someone blink?
screen will be displayed in the monitor. The face of the human subject that may
have closed his/her eyes is framed by a yellow border. In such a case, you can
check the shot picture and determine if you take the picture again.
➝ “Operating the Did someone blink? Screen”
Off (default setting)
Blink warning does not take effect.
To Use Description
Enlarge and display
the face of the person
who blinked
g (i) Rotate the zoom control to g (i).
Switch to full-frame
playback
f (h) Rotate the zoom control to f (h).
Select the face to be
displayed
If the camera detects more than one human
subjects with their eyes closed, press HIJ
K during the enlarged display to switch over
the face displayed.
Delete the shot image l Press l.
Return to shooting
mode
k
Press k or the shutter-release button.
To Next Page
Loading...
Need help?
General
